Ibm

Device successfully added. C:\Program Files (x86)\IBM\dsagent\bin>dscimcli.bat lsdev -l Type IP IP2 Username Storage Image Status C ode Level Min Codelevel ===== ======================================= ======================================= ========= ================ ========== = ============= ============== DS 10.XX.XX.XX - admin IBM.1750-68XXXXX successful 5 .2.2.533 5.0.6.235 DS 10.XX.XX.XX - admin IBM.1750-68XXXXX successful 5 .2.2.565 5.0.6.235 C:\Program Files (x86)\IBM\dsagent\bin>

If you need to user ibm lto tape drive inside IBM, Adic, Dell tapelibrary, with Tivoli Storage Manager is necessary to use Download latest driver from IBM Fixcentral: Storage Systems => Tape Systems => Tape device drivers and software => Linux Get two two RPMs (my system is an RHEL 5 on 32bit hardware) : lin_tape-1.61.0-1.src.rpm <== Kernel module lin_taped-1.61.0-rhel5.i386.rpm <== Binary services First step, rebuild the source: # rpmbuild --rebuild lin_tape-1.61.0-1.src.rpm` ` Installing lin_tape-1.61.0-1.src.rpm Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.625 + umask 022 + cd /usr/src/redhat/BUILD + cd /usr/src/redhat/BUILD + rm -rf lin_tape-1.61.0 + /bin/gzip -dc /usr/src/redhat/SOURCES/lin_tape-1.61.0.tgz [cut] Wrote: /usr/src/redhat/RPMS/i386/lin_tape-1.61.0-1.i386.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.18792 + umask 022 + cd /usr/src/redhat/BUILD + cd lin_tape-1.61.0 + rm -rf /var/tmp/lin_tape-1.61.0-1-root-root + exit 0 Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.18792 + umask 022 + cd /usr/src/redhat/BUILD + rm -rf lin_tape-1.61.0 + exit 0 Second step, install all: ...

I’m getting this error on a 9114-275. SYSTEM POWER CONTROL MENU 1. Enable/Disable Unattended Start Mode: Currently Enabled 2. Ring Indicate Power-On Menu 3. Reboot/Restart Policy Setup Menu 4. Power-On System 5. Power-Off System 6. Enable/Disable Fast System Boot: Currently Slow Boot 7. Boot Mode Menu 98. Return to Previous Menu 99. Exit from Menus After digits “4” Please wait.... System Powering On. Exiting menus. 9022 9101 90FD 10117611 U0.1-F1 B0FF OK x The error on planar was located on FAN module, for resolution unplug entire block and single fans, then replug into the planar after cleaning up, then power on your pSeries.