Ibm on Details...

IBM CIM Agent for DS Open API

Sun, 17 Feb 2013 14:06:47 +0000

Device successfully added.
C:\Program Files (x86)\IBM\dsagent\bin>dscimcli.bat lsdev -l
Type  IP                                      IP2                                     Username  Storage Image    Status     C
ode Level     Min Codelevel
===== ======================================= ======================================= ========= ================ ========== =
============= ==============
DS    10.XX.XX.XX                             -                                       admin     IBM.1750-68XXXXX successful 5
.2.2.533      5.0.6.235
DS    10.XX.XX.XX                             -                                       admin     IBM.1750-68XXXXX successful 5
.2.2.565      5.0.6.235
C:\Program Files (x86)\IBM\dsagent\bin>

Linux - IBM LinTape driver

Mon, 19 Dec 2011 03:41:43 +0000

If you need to user ibm lto tape drive inside IBM, Adic, Dell tapelibrary, with Tivoli Storage Manager is necessary to use

Download latest driver from IBM Fixcentral: Storage Systems => Tape Systems => Tape device drivers and software => Linux

Get two two RPMs (my system is an RHEL 5 on 32bit hardware) : lin_tape-1.61.0-1.src.rpm <== Kernel module lin_taped-1.61.0-rhel5.i386.rpm <== Binary services

First step, rebuild the source:

# rpmbuild --rebuild lin_tape-1.61.0-1.src.rpm` `
 Installing lin_tape-1.61.0-1.src.rpm
 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.625
 + umask 022
 + cd /usr/src/redhat/BUILD
 + cd /usr/src/redhat/BUILD
 + rm -rf lin_tape-1.61.0
 + /bin/gzip -dc /usr/src/redhat/SOURCES/lin_tape-1.61.0.tgz
 [cut]
 Wrote: /usr/src/redhat/RPMS/i386/lin_tape-1.61.0-1.i386.rpm
 Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.18792
 + umask 022
 + cd /usr/src/redhat/BUILD
 + cd lin_tape-1.61.0
 + rm -rf /var/tmp/lin_tape-1.61.0-1-root-root
 + exit 0
 Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.18792
 + umask 022
 + cd /usr/src/redhat/BUILD
 + rm -rf lin_tape-1.61.0
 + exit 0

Second step, install all:

pSeries - 10117611 U0.1-F1

Sun, 09 May 2010 16:43:18 +0000

I’m getting this error on a 9114-275.

SYSTEM POWER CONTROL MENU
1. Enable/Disable Unattended Start Mode:
Currently Enabled
2. Ring Indicate Power-On Menu
3. Reboot/Restart Policy Setup Menu
4. Power-On System
5. Power-Off System
6. Enable/Disable Fast System Boot:
Currently Slow Boot
7. Boot Mode Menu
98. Return to Previous Menu
99. Exit from Menus

After digits “4”

Please wait....
System Powering On.  Exiting menus.
9022
9101
90FD
10117611        U0.1-F1
B0FF
OK               x

The error on planar was located on FAN module, for resolution unplug entire block and single fans, then replug into the planar after cleaning up, then power on your pSeries.