3 days ago I find a nice VAX Station 4000/60 on ebay for only 41 Euro (about 60 Dollars), obviously I bought it, and today delivery boy knock my door!
I paste the command/console output of the recovery procedure:
> KA46-A V1.4-38E-V4.2
> 08-00-2B-92-4E-C7
> 24MB
> ?? 001 9 NI 0172
> >>> sh config
> KA46-A V1.4-38E-V4.2
> 08-00-2B-92-4E-C7
> 24MB
> DEVNBR DEVNAM INFO
> ------ -------- --------------------------
> 1 NVR OK
> 2 LCG OK
> HR - 8 PLN FB - V1.2
> 3 DZ OK
> 4 CACHE OK
> 5 MEM OK
> 24MB = SY=8MB, S0/1=8MB, S2/3=8MB, S4/5=0MB
> 6 FPU OK
> 7 IT OK
> 8 SYS OK
> 9 NI ?? 001 0172
> 10 SCSI OK
> 3-L0-RZ26B 6-INITR
> 11 AUD OK
> >>> ?
> BOOT [/[R5:]<bflg>] [<ddau>[:]]
> CONTINUE
> DEPOSIT [{ /B | /W | /L | /Q | /A }] [{ /P | /V | /I }] [/G] [/U] [/N:<n>]
> [{ <addr> | <sym> | + | - | * | @ } [<datum>]]
> EXAMINE [{ /B | /W | /L | /Q | /A }] [{ /P | /V | /I }] [/G] [/U] [/N:<n>]
> [{ <addr> | <sym> | + | - | * | @ }]
> FIND [{ /MEMORY | /RPB }]
> HALT
> HELP
> INITIALIZE
> LOGIN
> REPEAT <cmd>
> SET BOOT <ddau>
> SET BFLG <bflg>
> SET DIAGENV <1-3>
> SET FBOOT <0-1>
> SET HALT <1-3>
> SET KBD <0-15>
> SET MOP <0-1>
> SET PSE <0-1>
> SET PSWD
> SET SCSI <0-7>
> SET TRIG <0-1>
> SHOW { BOOT | BFLG | CONFIG | DEV | DIAGENV | FBOOT | ETHER | ERROR |
> ESTAT | HALT | KBD | MEM | MOP | PSE | SCSI | TRIG }
> START <addr>
> TEST [/UTIL] <devnam | devnbr>
> UNJAM
> X <addr> <cnt> ...
> ?
> >>> B/1
> -DKA300
> SYSBOOT> SET/STARTUP OPA0:
> SYSBOOT> SET WINDOWS_SYSTEM 0
> %SYSBOOT-E-NOPARAM, no such parameter WINDOWS_SYSTEM
> SYSBOOT> SET WRITESYSPARAMS 0
> SYSBOOT> CONTINUE
> VAX/VMS Version V5.5-2H4 Major version id = 1 Minor version id = 0
> PLEASE ENTER DATE AND TIME (DD-MMM-YYYY HH:MM) 27-NOV-2009 3:51
> $
> $ SPAWN
> SPAWN
> %DCL-S-SPAWNED, process SYSTEM_1 spawned
> %DCL-S-ATTACHED, terminal now attached to process SYSTEM_1
> $ @SYS$SYSTEM:STARTUP
> $! Copyright (c) 1993 Digital Equipment Corporation. All rights reserved.
> %STDRV-I-STARTUP, VMS startup begun at 27-NOV-2009 04:00:59.19
> The VAX/VMS system is now executing the system startup procedure.
> %SET-I-NEWAUDSRV, identification of new audit server process is 00000088
> The VAX/VMS system is now executing the site-specific startup commands.
> %RUN-S-PROC_ID, identification of created process is 0000008C
> %NCP-W-FILOPE, File open error , Permanent database
> %NML-E-OPENOUT, error opening SYS$SYSROOT:[SYSEXE]NETLOGING.DAT; as output
> -RMS-F-PLV, unsupported prolog version
> %NCP-W-OPEFAI, Operation failure
> %SYSTEM-F-TIMEOUT, device timeout
> , timeout
> , unit is active
> , fatal hardware error
> %NCP-W-UNRCMP, Unrecognized component , Circuit
> Circuit = SVA-0
> %NCP-I-NOINFO, No information in database
> %RUN-S-PROC_ID, identification of created process is 0000008D
> Job NCPSTART (queue SYS$BATCH, entry 1) started on SYS$BATCH
> %RUN-S-PROC_ID, identification of created process is 0000008F
> %SET-I-INTSET, login interactive limit = 20, current interactive value = 1
> 27-NOV-2009 04:03:07
> Process SYSTEM_1 logged out at 27-NOV-2009 04:03:08.62
> Accounting information:
> Buffered I/O count: 3431 Peak working set size: 888
> Direct I/O count: 1440 Peak page file size: 3806
> Page faults: 16606 Mounted volumes: 0
> Charged CPU time: 0 00:00:22.71 Elapsed time: 0 00:02:18.06
> %DCL-S-RETURNED, control returned to process STARTUP
> $ SET DEFAULT SYS$SYSTEM
> SET DEFAULT SYS$SYSTEM
> $ RUN SYS$SYSTEM:AUTHORIZE
> RUN SYS$SYSTEM:AUTHORIZE
> UAF> MODIFY SYSTEM /PASSWORD=system
> %UAF-I-MDFYMSG, user record(s) updated
> UAF> EXIT
> %UAF-I-DONEMSG, system authorization file modified
> %UAF-I-RDBNOMODS, no modifications made to rights data base
> $ LOGOUT
> LOGOUT
> SYSTEM job terminated at 27-NOV-2009 04:04:26.81
> Accounting information:
> Buffered I/O count: 99 Peak working set size: 1056
> Direct I/O count: 46 Peak page file size: 3978
> Page faults: 471 Mounted volumes: 0
> Charged CPU time: 0 00:00:00.41 Elapsed time: 0 00:05:33.58
> Welcome to VAX/VMS V5.5-2H4
> Username: