$     ifconfig "IE0" inet6 ip6prefix 2001:1418:0193:0001::40/64
$     route add -inet6 default 2001:1418:0193:0001::250 -"I" "IE0"

$ RECALL string   Bring up last command beginning with string.
$ RECALL/ALL      Displays all commands and their numbers.
$ RECALL number   Use a number found  in RECALL/ALL.

$ {up-arrow}      Previous command in recall buffer.
$ {down-arrow}    Next command in recall buffer.
$ {Ctrl A}        Toggle insert/overstrike editing.
$ {Ctrl D}        Move one character left.
$ {Ctrl E}        Move to the end of the line.
$ {Ctrl F}        Move one character right.
$ {Ctrl H}        Move to the beginning of the line.
$ {Ctrl J}        Delete word left of cursor.
$ {Ctrl R}        Rewrite the command line.
$ {Ctrl U}        Delete line left of cursor.
$ {Ctrl X}        Cancel the current command line.

$ {Ctrl 3}        ASCII code for {Esc}.
$ {Ctrl I}        ASCII code for {Tab}.
$ {Ctrl Z}        Tell DCL "end of file". Used in some programs
to indicate more general sorts of "end" commands.

$ DEFINE/SYSTEM/EXECUTIVE_MODE QMAN$MASTER DKA100:[QUEMAN]
$ START/QUEUE/MANAGER DKA100:[SYSQUE]

$ SHOW QUEUE SYS$BATCH
%JBC-E-NOSUCHQUE, no such queue
Resolution:
$ INIT/QUE/BATCH SYS$BATCH
Problem:
$ SHOW QUEUE SYS$BATCH
%JBC-E-JOBQUEDIS, system job queue manager is not running
Resolution:
$ START/QUE SYS$BATCH
Full Reset:
$ STOP/QUE SYS$BATCH
$ DELETE/QUE SYS$BATCH
$ INIT/QUE/BATCH SYS$BATCH
More info:
OpenVMS System Manager's Manual
Chapter 13
Managing the Queue Manager and Queue Database
`

> KA46-A V1.4-38E-V4.2
> 08-00-2B-92-4E-C7
> 24MB
> ?? 001   9        NI  0172
> >>> sh config
> KA46-A V1.4-38E-V4.2
> 08-00-2B-92-4E-C7
> 24MB
> DEVNBR    DEVNAM           INFO
> ------    --------    --------------------------
> 1         NVR    OK
> 2         LCG    OK
> HR - 8 PLN FB - V1.2
> 3          DZ    OK
> 4       CACHE    OK
> 5         MEM    OK
> 24MB = SY=8MB, S0/1=8MB, S2/3=8MB, S4/5=0MB
> 6         FPU    OK
> 7          IT    OK
> 8         SYS    OK
> 9          NI    ?? 001 0172
> 10        SCSI    OK
> 3-L0-RZ26B   6-INITR
> 11         AUD    OK
> >>> ?
> BOOT [/[R5:]<bflg>] [<ddau>[:]]
> CONTINUE
> DEPOSIT [{ /B | /W | /L | /Q | /A }] [{ /P | /V | /I }] [/G] [/U] [/N:<n>]
> [{ <addr> | <sym> | + | - | * | @ }  [<datum>]]
> EXAMINE [{ /B | /W | /L | /Q | /A }] [{ /P | /V | /I }] [/G] [/U] [/N:<n>]
> [{ <addr> | <sym> | + | - | * | @ }]
> FIND [{ /MEMORY | /RPB }]
> HALT
> HELP
> INITIALIZE
> LOGIN
> REPEAT <cmd>
> SET BOOT <ddau>
> SET BFLG <bflg>
> SET DIAGENV <1-3>
> SET FBOOT <0-1>
> SET HALT <1-3>
> SET KBD <0-15>
> SET MOP <0-1>
> SET PSE <0-1>
> SET PSWD
> SET SCSI <0-7>
> SET TRIG <0-1>
> SHOW { BOOT | BFLG | CONFIG | DEV | DIAGENV | FBOOT | ETHER | ERROR |
> ESTAT | HALT | KBD | MEM | MOP | PSE | SCSI | TRIG }
> START <addr>
> TEST [/UTIL] <devnam | devnbr>
> UNJAM
> X <addr> <cnt> ...
> ?
> >>> B/1
> -DKA300
> SYSBOOT>  SET/STARTUP OPA0:
> SYSBOOT>  SET WINDOWS_SYSTEM 0
> %SYSBOOT-E-NOPARAM, no such parameter WINDOWS_SYSTEM
> SYSBOOT>  SET WRITESYSPARAMS 0
> SYSBOOT>  CONTINUE
> VAX/VMS Version V5.5-2H4 Major version id = 1 Minor version id = 0
> PLEASE ENTER DATE AND TIME (DD-MMM-YYYY  HH:MM)  27-NOV-2009 3:51
> $
> $ SPAWN
> SPAWN
> %DCL-S-SPAWNED, process SYSTEM_1 spawned
> %DCL-S-ATTACHED, terminal now attached to process SYSTEM_1
> $ @SYS$SYSTEM:STARTUP
> $!  Copyright (c) 1993 Digital Equipment Corporation.  All rights reserved.
> %STDRV-I-STARTUP, VMS startup begun at 27-NOV-2009 04:00:59.19
> The VAX/VMS system is now executing the system startup procedure.
> %SET-I-NEWAUDSRV, identification of new audit server process is 00000088
> The VAX/VMS system is now executing the site-specific startup commands.
> %RUN-S-PROC_ID, identification of created process is 0000008C
> %NCP-W-FILOPE, File open error , Permanent database
> %NML-E-OPENOUT, error opening SYS$SYSROOT:[SYSEXE]NETLOGING.DAT; as output
> -RMS-F-PLV, unsupported prolog version
> %NCP-W-OPEFAI, Operation failure
> %SYSTEM-F-TIMEOUT, device timeout
> , timeout
> , unit is active
> , fatal hardware error
> %NCP-W-UNRCMP, Unrecognized component , Circuit
> Circuit = SVA-0
> %NCP-I-NOINFO, No information in database
> %RUN-S-PROC_ID, identification of created process is 0000008D
> Job NCPSTART (queue SYS$BATCH, entry 1) started on SYS$BATCH
> %RUN-S-PROC_ID, identification of created process is 0000008F
> %SET-I-INTSET, login interactive limit = 20, current interactive value = 1
> 27-NOV-2009 04:03:07
> Process SYSTEM_1 logged out at 27-NOV-2009 04:03:08.62
> Accounting information:
> Buffered I/O count:            3431         Peak working set size:     888
> Direct I/O count:              1440         Peak page file size:      3806
> Page faults:                  16606         Mounted volumes:             0
> Charged CPU time:           0 00:00:22.71   Elapsed time:     0 00:02:18.06
> %DCL-S-RETURNED, control returned to process STARTUP
> $ SET DEFAULT SYS$SYSTEM
> SET DEFAULT SYS$SYSTEM
> $ RUN SYS$SYSTEM:AUTHORIZE
> RUN SYS$SYSTEM:AUTHORIZE
> UAF> MODIFY SYSTEM /PASSWORD=system
> %UAF-I-MDFYMSG, user record(s) updated
> UAF> EXIT
> %UAF-I-DONEMSG, system authorization file modified
> %UAF-I-RDBNOMODS, no modifications made to rights data base
> $ LOGOUT
> LOGOUT
> SYSTEM       job terminated at 27-NOV-2009 04:04:26.81
> Accounting information:
> Buffered I/O count:              99         Peak working set size:    1056
> Direct I/O count:                46         Peak page file size:      3978
> Page faults:                    471         Mounted volumes:             0
> Charged CPU time:           0 00:00:00.41   Elapsed time:     0 00:05:33.58
> Welcome to VAX/VMS V5.5-2H4
> Username: