Adsl

To my amazement, Telecom Italia released a pilot project of IPv6 deployment on residential/dynamic ip only adsl internet access, but on theirs support site there’s configuration only for some useless systems. So, I’ve decided to write a configuration for Cisco platform. Usually the typical Telecom Italia PPPoE or PPPoA ADSL connection with dynamic IPv4 only was authenticated with “aliceadsl” as user and password, now with bran new credential along IPv4 the endpoint router advertise a IPv6 /64 class (always dynamic). ...

If you have performance problem on Cisco 1721, Cisco 2610XM-2651XM, Cisco 2691, and Cisco 3660, with WIC-1DSL - IOS 12.3(2) or above, probably depends on the default value associated with ALL5 clockrate. If yuo wanna check type the following command on your router: hellroute01#show controller atm0/0 | include ATM0/0 Interface: ATM0/0, Hardware: DSLSAR (with Alcatel ADSL Module), State: up SCC0 = 2600000 (ATM0/0) SCC3 = 1000000 (ATM0/0) hellroute01# If you get 2600000 (default value) on SCC0 or SCC1 your downlink speed rate probably is limitated at about 300 KB/s ...