Posts

Messaging => Configurations => MIME => Conversion Options

Dear Leonardo Rizzi, Your application [Request-54213] has been completed and a PEN has been assigned. Your organization’s PEN is: 41129 Below is a copy of your PEN record. This record will be visible in the IANA PEN registry within an hour. The IANA PEN registry is available at the following address: http://www.iana.org/assignments/enterprise-numbers Decimal | Organization | | Contact | | | Email | | | | 41129 WideNet Leonardo Rizzi l.rizzi&wide-net.org

This is a configuration for use old cisco 827 router as rfc1483 bridge (a stupid pppoe modem) version 12.1 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Router ! ! ! ! ! ! ip subnet-zero no ip routing ! ! ! ! interface Ethernet0 no ip address no ip route-cache bridge-group 1 ! interface ATM0 no ip address no ip route-cache no atm ilmi-keepalive bundle-enable dsl operating-mode auto ! interface ATM0.1 point-to-point no ip route-cache pvc 8/35 encapsulation aal5snap ! bridge-group 1 ! ip classless no ip http server ! bridge 1 protocol ieee ! line con 0 transport input none stopbits 1 line vty 0 4 login ! scheduler max-task-time 5000 end

dmesg tail: da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SanDisk Cruzer Micro 6.51> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 988MB (2025471 512 byte sectors: 64H 32S/T 988C) root@amnesyac% dd if=/dev/zero of=/dev/da0 bs=128k 2435+0 records in 2434+0 records out 319029248 bytes transferred in 352.314078 secs (905525 bytes/sec) root@amnesyac% disklabel -R -w da0 auto root@amnesyac% newfs -U /dev/da0 /dev/da0: 989.0MB (2025468 sectors) block size 16384, fragment size 2048 using 6 cylinder groups of 183.69MB, 11756 blks, 23552 inodes. with soft updates super-block backups (for fsck -b #) at: 32, 376224, 752416, 1128608, 1504800, 1880992 root@amnesyac% mkdir /var/tmp/usb root@amnesyac% mount /dev/da0 /var/tmp/usb root@amnesyac% mv junos-jsr-12.1R5.5-export.tgz /cf/var/tmp/usb/ root@amnesyac% cli root@amnesyac> file list detail /var/tmp/usb /var/tmp/usb: total 406474 drwxrwxr-x 2 root operator 512 Feb 28 04:52 .snap/ -rw-r--r-- 1 root wheel 208012563 Feb 27 19:33 junos-jsr-12.1R5.5-export.tgz root@amnesyac> request system software add junos-jsr-12.1R5.5-export.tgz ERROR: Missing package: /cf/root/junos-jsr-12.1R5.5-export.tgz root@amnesyac> request system software add /var/tmp/usb/junos-jsr-12.1R5.5-export.tgz NOTICE: Validating configuration against junos-jsr-12.1R5.5-export.tgz. NOTICE: Use the 'no-validate' option to skip this if desired. Checking compatibility with configuration Initializing... Verified manifest signed by PackageProduction_9_6_0 Using /var/tmp/usb/junos-jsr-12.1R5.5-export.tgz Checking junos requirements on / Available space: 80793 require: 4688 Saving boot file package in /var/sw/pkg/junos-boot-jsr-12.1R5.5.tgz Verified manifest signed by PackageProduction_12_1_0 Hardware Database regeneration succeeded Validating against /config/juniper.conf.gz cp: /cf/var/validate/chroot/var/etc/resolv.conf and /etc/resolv.conf are identical (not copied). cp: /cf/var/validate/chroot/var/etc/hosts and /etc/hosts are identical (not copied). [edit system services ssh] 'ssh' warning: daemon binary /usr/sbin/sshd not found mgd: commit complete Validation succeeded Installing package '/var/tmp/usb/junos-jsr-12.1R5.5-export.tgz' ... Verified junos-boot-jsr-12.1R5.5.tgz signed by PackageProduction_12_1_0 Verified junos-jsr-12.1R5.5-export signed by PackageProduction_12_1_0 Available space: 81388 require: 4688 WARNING: JUNOS edition export != domestic, need to regenerate ssh host keys Saving boot file package in /var/sw/pkg/junos-boot-jsr-12.1R5.5.tgz JUNOS 12.1R5.5 will become active at next reboot WARNING: A reboot is required to load this software correctly WARNING: Use the 'request system reboot' command WARNING: when software installation is complete Saving package file in /var/sw/pkg/junos-12.1R5.5.tgz ... cp: /var/sw/pkg/junos-12.1R5.5.tgz: No space left on device Saving state for rollback ... root@amnesyac> request system reboot Reboot the system ? [yes,no] (no) yes Shutdown NOW! [pid 1988] root@amnesyac> *** FINAL System shutdown message from root@amnesyac *** System going down IMMEDIATELY Timeout, server not responding.

Device successfully added. C:\Program Files (x86)\IBM\dsagent\bin>dscimcli.bat lsdev -l Type IP IP2 Username Storage Image Status C ode Level Min Codelevel ===== ======================================= ======================================= ========= ================ ========== = ============= ============== DS 10.XX.XX.XX - admin IBM.1750-68XXXXX successful 5 .2.2.533 5.0.6.235 DS 10.XX.XX.XX - admin IBM.1750-68XXXXX successful 5 .2.2.565 5.0.6.235 C:\Program Files (x86)\IBM\dsagent\bin>

user fspbld does not exist - using root group fspbld does not exist - using root 01SF240_418_382 ################################################## root@localhost:/home/root/code#/usr/lpp/diagnostics/bin/update_flash -f /tmp/fwupdate/01SF240_418_382 The image is valid and would update the temporary image to SF240_418. The new firmware level for the permanent image would be SF235_214. The current permanent system firmware image is SF235_214. The current temporary system firmware image is SF235_214. ***** WARNING: Continuing will reboot the system! ***** Do you wish to continue? Enter 1=Yes or 2=No 1 SHUTDOWN PROGRAM Fri Feb 8 10:16:44 CST 2013 0513-044 The sshd Subsystem was requested to stop. root@localhost:/home/root#/usr/lpp/diagnostics/bin/update_flash -c The commit operation is in progress. Please stand by. The commit operation was successful.

Recently I’ve deployed some Blackberry Enterprise Server, this link is useful for firewalls policy deploy http://www.blackberry.com/btsc/KB11036

[root@pbx01.mil1.wide-net.org ~]# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/VolGroup00-LogVol00 1779856 1553320 138068 92% / /dev/vda1 101086 40798 55069 43% /boot tmpfs 513060 0 513060 0% /dev/shm [root@pbx01.mil1.wide-net.org ~]# vgscan Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata type lvm2 [root@pbx01.mil1.wide-net.org ~]# fdisk /dev/vda vda vda1 vda2 [root@pbx01.mil1.wide-net.org ~]# fdisk /dev/vda Command (m for help): p Disk /dev/vda: 4219 MB, 4219469824 bytes 255 heads, 63 sectors/track, 512 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/vda1 * 1 13 104391 83 Linux /dev/vda2 14 382 2963992+ 8e Linux LVM Command (m for help): d Partition number (1-4): 2 Command (m for help): p Disk /dev/vda: 4219 MB, 4219469824 bytes 255 heads, 63 sectors/track, 512 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/vda1 * 1 13 104391 83 Linux Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 2 First cylinder (14-512, default 14): Using default value 14 Last cylinder or +size or +sizeM or +sizeK (14-512, default 512): Using default value 512 Command (m for help): p Disk /dev/vda: 4219 MB, 4219469824 bytes 255 heads, 63 sectors/track, 512 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/vda1 * 1 13 104391 83 Linux /dev/vda2 14 512 4008217+ 83 Linux Command (m for help): t Partition number (1-4): 2 Hex code (type L to list codes): 8e Changed system type of partition 2 to 8e (Linux LVM) Command (m for help): p Disk /dev/vda: 4219 MB, 4219469824 bytes 255 heads, 63 sectors/track, 512 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/vda1 * 1 13 104391 83 Linux /dev/vda2 14 512 4008217+ 8e Linux LVM Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. WARNING: Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot. Syncing disks. [root@pbx01.mil1.wide-net.org ~]# reboot Broadcast message from root (pts/0) (Sat Sep 15 23:36:59 2012): The system is going down for reboot NOW! [root@pbx01.mil1.wide-net.org ~]# Connection to pbx01.mil1.wide-net.org closed by remote host. Connection to pbx01.mil1.wide-net.org closed. [leo@thinkleo3 ~]$ [root@pbx01.mil1.wide-net.org ~]# pvdisplay --- Physical volume --- PV Name /dev/vda2 VG Name VolGroup00 PV Size 2.83 GB / not usable 14.52 MB Allocatable yes PE Size (KByte) 32768 Total PE 90 Free PE 26 Allocated PE 64 PV UUID 3KFfOG-kfJZ-hNtT-0vo5-Lpzk-4iMR-rMmLzH [root@pbx01.mil1.wide-net.org ~]# pvresize /dev/vda2 Physical volume "/dev/vda2" changed 1 physical volume(s) resized / 0 physical volume(s) not resized [root@pbx01.mil1.wide-net.org ~]# pvdisplay --- Physical volume --- PV Name /dev/vda2 VG Name VolGroup00 PV Size 3.82 GB / not usable 10.09 MB Allocatable yes PE Size (KByte) 32768 Total PE 122 Free PE 58 Allocated PE 64 PV UUID 3KFfOG-kfJZ-hNtT-0vo5-Lpzk-4iMR-rMmLzH [root@pbx01.mil1.wide-net.org ~]# lvdisplay --- Logical volume --- LV Name /dev/VolGroup00/LogVol00 VG Name VolGroup00 LV UUID f134eo-A1TY-mj72-g16E-oBnl-fnNM-4hULDC LV Write Access read/write LV Status available # open 1 LV Size 1.75 GB Current LE 56 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Name /dev/VolGroup00/LogVol01 VG Name VolGroup00 LV UUID 1gNpNl-ypNO-bj4a-Gsyb-eGnS-UcFh-Rbocfj LV Write Access read/write LV Status available # open 1 LV Size 256.00 MB Current LE 8 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1 [root@pbx01.mil1.wide-net.org ~]# lvresize /dev/VolGroup00/LogVol00 -l +1 Extending logical volume LogVol00 to 3.59 GB Insufficient free space: 1 extents needed, but only 0 available [root@pbx01.mil1.wide-net.org ~]# resize2fs /dev/VolGroup00/LogVol00 resize2fs 1.39 (29-May-2006) Filesystem at /dev/VolGroup00/LogVol00 is mounted on /; on-line resizing required Performing an on-line resize of /dev/VolGroup00/LogVol00 to 933888 (4k) blocks. The filesystem on /dev/VolGroup00/LogVol00 is now 933888 blocks long. [root@pbx01.mil1.wide-net.org ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 3.5G 1.5G 1.8G 46% / /dev/vda1 99M 40M 54M 43% /boot tmpfs 502M 0 502M 0% /dev/shm [root@pbx01.mil1.wide-net.org ~]# reboot Broadcast message from root (pts/0) (Sat Sep 15 23:43:32 2012): The system is going down for reboot NOW! [root@pbx01.mil1.wide-net.org ~]#`

For really strange combination of events, I need this tables of error codes from Tivoli Productivity Center - Storage resource agent. Return code Explanation 1 There is a problem uninstalling the Data agent or Fabric agent. For more information about what caused the uninstallation to fail, check the uninstallation logs for the Data agent or Fabric agent. 2 Command not valid. 3 Option provided is not valid. 5 Argument is not valid. 6 Missing value for argument (e.g. -installLoc , where is missing). 7 Missing localized string in message file. 8 Probe is running. 9 Failed to open file for write. 10 Failed to close file. 11 Logfile not specified.19Failed in tracing.21Cannot spawn a probe because it is busy. 30 This is an internal error in initializing tracing. Save the error message and error log and contact your service representative for assistance in resolving the error. 32 Invalid socket. 33 Start service failed. 34 Registry entry not found. 35 Deployment of the agent failed, error creating startup scripts. 36 File does not exist. 40 Missing upgrade files. 41 Failed to extract files in upgrade process. 42 Failed to stop probe in upgrade process. 43 Failed to stop Agent. 44 Failed to start Agent. 45 Agent Registration to server failed. 46 File extraction needs more space. 47 Failed to open archive file. 48 Agent did not start after upgrade. 49 Installation directory not valid at upgrade time. 50 Probe is running. 51 Data file not found. 52 Exit code not in the output file. 53 Failed to send job status. 54 Failed to copy certificate files. 55 Failed to create directory. 56 Failed to remove directory. 57 Exec command failed. 58 Conversion of wide character failed. 59 Installation directory not valid. 60 Server name not defined. 61 Error in removing entries from configuration file. 62 Failed to stop probe at uninstall time. 63 Failed to remove registry entry at uninstall time. 64 Failed to remove service entry at uninstall time. 65 Failed to stop service at uninstall time. 66 Specified server name is not valid. 67 There is an error installing the Storage Resource agent as part of the migration process. For more information about what caused the installation to fail, check the installation logs for the Storage Resource agent. 71 Failed to spawn process. 73 Failed to spawn probe process. 101 Failed to create lock at installation time. 102 Failed to stop probe at re-installation time. 103 Failed to stop agent at re-installation time. 104 Failed to create registry at installation time. 105 Failed to extract files at installation time. 106 Failed to create entries in configuration file at installation time. 107 Failed to stop service at re-installation time. 108 Service already exists. 109 Failed to create service. 110 Failed to start service. 111 Probe failed at installation time. 112 Creation of daemon failed. 113 Installation of GUID failed. 114 Commtype parameter is not valid. 115 Specified port is in use. 116 Installation/Upgrade does not have enough space. 117 Installation in progress. 118 Cannot get server name from Server. 119 Installation location is not empty. 120 Missing parameter Server Name. 121 Missing parameter Server Port. 123 Missing parameter Server IP. 124 Missing parameter Agent Port. 125 Missing parameter Installation location. 127 Deployment from Windows to Linux failed. 130 Failed to send probe results. 131 Failed to initialize Agent. 133 Missing port number for Service. 134 Get data file stat failed. 135 Get data file read failed. 137 Failed to send data to server. 138 Failed to receive data from server. 139 Full path not specified for copy file. 140 Create file failed in copy file function. 141 Write file failed in copy file function. 142 Open file failed in copy file function. 143 Read file failed in copy file function. 145 UCS conversion failed. 146 Server connection failed. 148 Failed to create zip file. 149 Failed to unzip file. 160 Failed to send scan results. 161 Failed to send TSM status results. 164 Failed to validate user. 165 Job file was not found. 166 Job was not stopped. 168 Not enough free space available while copying file from server. 169 Multipath driver not found. 170 Multipath device not found. 171 Multipath policy is not supported. 172 Only Round Robin policy is supported for Multipath DM driver.

DRAFT ipv6 unicast-routing ipv6 cef interface FastEthernet0/0 ipv6 address NODE-PD ::1/64 ipv6 enable interface Dialer0 ipv6 address NODE-PD ::1/128 ipv6 enable ipv6 dhcp client pd NODE-PD rapid-commit ipv6 route ::/0 Dialer0 DRAFT